Відео

Thank you! The most difficult part was redoing the engine harness, mechanically its not so bad

😅 Going to shoot for 350hp first on the stock M54B25 but we’ll keep upping the ante to find the limit!!

@@AdamPE21 My personal desire is an M50B52 with a modded M50NV head for single vanos, shimmed lifters, new springs, a fancy pnp, M54B30 Crank, S52 diameter piston (86mm i think) and a 6262 or 6266 sized turbo to stuff into my M3 but the M54B25 isn't a terrible place to to start. ;). The AWD on the e36 really hasn't been explored and is a very nice idea for a big improvement in putting down power.

@robertfontaine3650 I am doing it more for off-road traction, dirt roads and logging trails but eventually if I get a bit of power under it, it would be nice to take to a track day. Take a look at my other videos for the reverse engineering we are doing on the E90 xDrive electronic transfer case!

Thank you for watching! I hope the event continues to build on itself year after year.

No problem Ryan! I’ll be back again next year for sure!!!

The colors would make sense!

if anything we have documentation as to how it looked in 2023 and 2024! Excited to see what the future holds

Excellent, do they have this for Nascar 4 as well?

@@AdamPE21I've never done it before, but its definitely possible to play online in those games, but no league racing happens regularly. Great game though.In nr2003, I'm in a league that races Tuesdays nights at 7PM and we have 5-15 people show up regularly. Great fun. If you want to give it a try, were always open, haha.

Good question, can you hear the latch disengaging? The doors are very heavy, so if you can at least hear the latch disengage you’ll have to pull really hard. If latch doesn’t disengage you’ll need to figure out how to energize/override it.

Take a look here! LS6 Sonoma On Track! ua-cam.com/video/K3Gc11uQcgg/v-deo.html

It definitely hooks up better after jumping a wave, pump doesn’t have to catch up (especially with my 1/8th of a ton frame). I was surprised the top speed increased (although small), I would have figured the extra drag/“downforce” to the water would have slowed it. In the coming weeks I will be installing a new stainless impeller and wear ring for another comparison!

I haven’t logged any data but don’t have access to an xDrive car anyways! Good idea on the circuit breaker though, at least would be a last resort if something shorts.

From a major mechanical standpoint mine has been pretty reliable, 10 years since I rebuilt. The aging ebox is cause for concern though as my starter solenoid and stop switch coil both have had issues. It seems like every season there’s something I need to chase but once fixed its good for the year. So they require some work to keep going but at least for me it’s nothing I havent been able to resolve in a weekend.

Sure 😁

I think you are going to be impressed!

My dad would tell stories about how he snuck away from my grandparents house for a night or two with his 70 GTO to do spectator drags at the strip! The place has always had a special spot in my heart as well. Thanks for watching!

​@AdamPE21 Same here . My dad had a 65 gto 389 tir power . And the big name racers that came through there.

1987

It does! This washer has the heating element built in. After a few cycles the water will warm up and during the dry cycle it warms the parts as well

@@AdamPE21 that's so awesome. I'm gonna do the v same if I find one for free lol

@MrYogitron92 Free is the way!

@@AdamPE21 always 😂

Awesome! this was year 26 for me

Thanks for watching! Next show is August 11th and I will be posting up a video from an interview with the organizer in a week or so!

@@AdamPE21 Liked and subscribed, look forward to the next one.

Go ahead man! I will try to answer over next day or two

Thanks man!!

Yeah when I say locked up it is literally bound up. I feel like there is some bearing loading that happens when the transfer case actuator is stalled. I would not want to drive torque into the TC in this state. Still on my UA-cam editing journey, figuring out how to be more efficient with the videos. Stay tuned for more 😃

@@AdamPE21 Absolutely. I plan to build an E36 Wagon with an E91 complete drivetrain installed, so very interested in tweaking with the 4WD Features. I plan to build off of your efforts here, and document it with credit to you, so keep up the good work!

@Garageaholic Thanks man! Good luck.

Yes, a lot more comfortable but definitely not as quick. It makes me realize I have to do something about the brakes on the E21 to make it more responsive!

Thanks! Yeah man it was a blast! Going to roll the fender lips up front and stiffen up front springs at least and look into a seat that’s got some bolstering to it. Though the ride is nice and cushy in the OE seat, but sometimes a sacrifice is necessary for speed!!

Thank you Luis!!

Most of the property has been cleared!

@micahfleming9890 Awesome to hear! I won’t be able to make it this year unfortunately, but hopefully it’s on next year again!!!

@@AdamPE21 if plans change let me know and I’ll get you in there! I’m not sure if you saw the flyer or not but we opened up a 501(c)(3) non profit for the track and we are releasing our goals to the public at the show this year!

@micahfleming9890 Thanks man, appreciate it! If not this year I’ll need there next year. Thinking about ever getting some fun runs going at some point on the track? 😀

@@AdamPE21 it’s in the works😉

Thank you sir! 🫡

A melding of GPS technology and frame by frame edits!

there is supposed to be another one this year! I don’t think my schedule will allow me to make it but here is your chance to go

@@AdamPE21August 11th!!!!

we had under the stands and turn three, waited it out there, and then went up as soon as the rain let up!

ah hahaha my mistake! It was the Thunderbirds 😅

Not sure, it ran out of gas on one tank and flamed up when I switched to the other. No pops or bangs with it either. Have never had this happen before, but ran fine once it started.

@AdamPE21 yeah I've been a lawnmower mechanic for 10 years and never seen that either.

Hot exhaust pipe, old spark plug, so gas burn outside the engine

@FahrenheitRUS but it started and ran , it happened after he switched tanks and it ran fine so the spark plug works. I've worked with many hot exhausts and old spark plugs and that's never happened.

How would a spark plug make it shoot flames?